Dynamic-filtration experiments conducted on oil-based muds show that the dynamic-filtration rate is much higher than API filtration rates. The use of water-wet solids results in very poor-quality external mudcakes and high fluid-loss rates. Better external mudcakes are formed by mixing equal parts organophilic clay and mud. Filtration-loss-control additives (asphalt mineral pitches) do not reduce the equilibrium filtration rate, but do reduce spurt loss and limit solids invasion. In brine-saturated rocks, the invasion rate for oil-based muds is significantly smaller than for water-based muds because capillary pressure prevents the oil phase from entering the core in oil-based muds. Oil-based mudcakes are softer and more shear-sensitive than water-based mudcakes. Scanning electron microscope (SEM) photomicrographs indicate that oil-based mudcakes consist of individual water droplets coated with clay particles. This cake structure gives rise to the low permeability and shear sensitivity of oil-based muds