Publications
Found 30 results
Author Keyword Type [ Year] Filters: Keyword is Oilfield water handling [Clear All Filters]
"Effect of polydopamine deposition conditions on fouling resistance, physical properties, and permeation properties of reverse osmosis membranes in oil/water separation", Journal of Membrane Science, vol. Volumes 425–426, 01/2013.
, "Estimates of Fracture Lengths in an Injection Well by History Matching Bottomhole Pressures and Injection Profile", SPE Reservoir Evaluation & Engineering, vol. 14, issue 04, pp. 385-397, 08/2011.
, "Impact of Fracture Growth on Well Injectivity and Reservoir Sweep during Waterflood and Chemical EOR Processes", SPE Annual Technical Conference and Exhibition, Denver, Colorado, U.S.A., October 30-November 2, 2011, Society of Petroleum Engineers, 10/2011.
, "Surface Modification of Commercial Polyamide Desalination Membranes Using Poly (Ethylene Glycol) Diglycidyl Ether to Enhance Membrance Fouling Resistance", Journal of Membrane Science, vol. Volume 367, 02/2011.
, "Estimating Fracture Lengths and Injection Profile in an Injection Well by History Matching Bottom Hole Pressures", SPE Western Regional Meeting, Anaheim, California, U.S.A., May 27-29, 2010, Society of Petroleum Engineers, 05/2010.
, "Method Optimizes Waterflood Projects", The American Oil & Gas Reporter, vol. 52, pp. 122-129, 02/2010.
, "Effect of Crossflow Testing Conditions, Including Feed pH and Continuous Feed Filtration, on Commerical Reverse Osmosis Membrane Performance", Journal of Membrance Science, vol. 345, issue 1-2, pp. 97-109, 12/2009.
, "PEG-Based Hydrogel Membrane Coatings", Polymer, vol. 50, issue 3, pp. 756-766, 01/2009.
, "PEG-Coated Reverse Osmosis Membranes: Desalination Properties and Fouling Resistance", Journal of Membrane Science, vol. 340, issue 1+2, pp. 92-108, 09/2009.
, "Surface Modification to Enhance the Fouling Resistance of Commercial Reverse Osmosis Membranes", 2009 AlChE Annual Meeting, Nashville, Tennessee, U.S.A., November 8-13, 2009, AlChE, 10/2008, 2009.
, "A Unified, Multidisciplinary Approach to the Planning and Design of Deepwater Waterflooding Projects", SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, U.S.A., October 4-7, 2009, Society of Petroleum Engineers, 10/2009.
, "Development and Use of a Simulation Model for Mobility/Conformance Control Using a pH-Sensitive Polymer", 2007 SPE Annual Technical Conference and Exhibition, 11/2007.
, "Synthesis and Characterization of Surface Coated Ultrafiltration Membranes to enhanced Oil/Water Fouling Resistance", ACS Division of Polymeric Materials: Science and Engineering, vol. 95, San Francisco, California, U.S.A., September 10-14, 2006, American Chemical Society, pp. 68, 09/2006.
, "Transport of a pH-Sensitive Polymer in Porous Media for Novel Mobility-Control Applications", SPE/DOE Symposium on Improved Oil Recovery, Tulsa, Oklahoma, U.S.A., April 22-26, 2006, Society of Petroleum Engineers, 04/2006.
, "A New Approach to Modeling Hydraulic Fractures in Unconsolidated Sands", SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., October 9-12, 2005, Society of Petroleum Engineers, 10/2005.
, "A Rheological Model for pH Sensitive Ionic Polymer Solutions for Optimal Mobility Control Applications", SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., October 9-12, 2005, Society of Petroleum Engineers, 10/2005.
, "An Experimental Investigation of Fracture Propagation During Water Injection", International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 20-21, 2002, Society of Petroleum Engineers, 02/2002.
, "Process-Based Decomposition On Distributed Systems-A Strategy To Solve Large Scale Simulation Problems", SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., September 29 - October 2, 2002, Society of Petroleum Engineers, 10/2002.
, "Use of a pH Sensitive Polymer for Conformance Control", International Symposium & Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 20-21, 2002, Society of Petroleum Engineers, 02/2002.
, "Growing Injection Well Fractures and Their Impact on Waterflood Performance", SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, U.S.A., September 30 - October 03, 2001, Society of Petroleum Engineers, 09/2001.
, "Injectivity Decline in Water Injection Wells: An Offshore Gulf of Mexico Case Study", SPE Production & Facilities, vol. 15, pp. 6-13, 02/2000.
, "Modeling Injection Well Performance during Deep-well Injection of Liquid Wastes", Journal of Hydrology, vol. 227, issue 1-4, pp. 41-55, 01/2000.
, "Role of Fracture Face and Formation Plugging in Injection Well Fracturing and Injectivity Decline", SPE/EPA Exploration and Production Environmental Conference, Austin, Texas, U.S.A., March 1-3, 1999, Society of Petroleum Engineers, 03/1999.
, "Determination of the Filtration Coefficient and the Transition Time for Water Injection", SPE European Formation Damage Conference, The Hague, Netherlands, June 2-3, 1997, Society of Petroleum Engineers, 06/1997.
, "A Model For Predicting Injectivity Decline in Water Injection Wells", SPE Formation Evaluation, vol. 12, issue 03, pp. 194-201, 09/1997.
, "Evaluating the Performance of Open-Hole, Perforated and Fractured Water Injection Wells", SPE European Formation Damage Control Conference, The Hague, Netherlands, May 15-16, 1995, Society of Petroleum Engineers, 05/1995.
, "A Stokesian Dynamics Model for Particle Deposition and Buildup in Granular Media", Journal of Colloid and Interface Science, vol. 153, issue 02, pp. 314-336, 10/1992.
, "A Model for Precipitation and Dissolution Processes with Precipitate Migration", AIChE Journal, vol. 35, 08/1989.
, "A Network Model for Deep Bed Filtration Processes", AIChE Journal, vol. 33, 10/1987.
, "Transport of Particulate Suspensions in Porous Media. Model Formulation", AIChE Journal, vol. 33, 10/1987.
,