Publications

S. Kasemset, A. Lee, D. J. Miller, B. D. Freeman, and M. M. Sharma, “Effect of polydopamine deposition conditions on fouling resistance, physical properties, and permeation properties of reverse osmosis membranes in oil/water separation”, Journal of Membrane Science, vol. Volumes 425–426, 2013, doi: http://dx.doi.org/10.1016/j.memsci.2012.08.049.

A. Suri, M. M. Sharma, and E. J. Peters, “Estimates of Fracture Lengths in an Injection Well by History Matching Bottomhole Pressures and Injection Profile”, SPE Reservoir Evaluation & Engineering, vol. 14, no. 04, pp. 385–397, 2011, doi: http://dx.doi.org/10.2118/132524-PA.

K. Lee, C. Huh, and M. M. Sharma, “Impact of Fracture Growth on Well Injectivity and Reservoir Sweep during Waterflood and Chemical EOR Processes”, in SPE Annual Technical Conference and Exhibition, Denver, Colorado, U.S.A., October 30-November 2, 2011: Society of Petroleum Engineers, 2011. doi: http://dx.doi.org/10.2118/146778-MS.

E. M. Van Wagner, A. C. Sagle, M. M. Sharma, Y. H. La, and B. D. Freeman, “Surface Modification of Commercial Polyamide Desalination Membranes Using Poly (Ethylene Glycol) Diglycidyl Ether to Enhance Membrance Fouling Resistance”, Journal of Membrane Science, vol. Volume 367, 2011, doi: http://dx.doi.org/10.1016/j.memsci.2010.11.001.

A. Suri, M. M. Sharma, and E. J. Peters, “Estimating Fracture Lengths and Injection Profile in an Injection Well by History Matching Bottom Hole Pressures”, in SPE Western Regional Meeting, Anaheim, California, U.S.A., May 27-29, 2010: Society of Petroleum Engineers, 2010. doi: http://dx.doi.org/10.2118/132524-MS.

F. R. Chaban, M. M. Sharma, A. Suri, and G. T. Gibson, “Method Optimizes Waterflood Projects”, The American Oil & Gas Reporter, vol. 52, pp. 122–129, 2010.

F. R. Chaban, M. M. Sharma, A. Suri, and G. T. Gibson, “A Unified, Multidisciplinary Approach to the Planning and Design of Deepwater Waterflooding Projects”, in SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, U.S.A., October 4-7, 2009: Society of Petroleum Engineers, 2009. doi: http://dx.doi.org/10.2118/124857-MS.

E. M. Van Wagner, A. C. Sagle, M. M. Sharma, and B. D. Freeman, “Effect of Crossflow Testing Conditions, Including Feed pH and Continuous Feed Filtration, on Commerical Reverse Osmosis Membrane Performance”, Journal of Membrance Science, vol. 345, no. 1-2, pp. 97–109, 2009, doi: 10.1016/j.memsci.2009.08.033.

A. C. Sagle, H. Ju, B. D. Freeman, and M. M. Sharma, “PEG-Based Hydrogel Membrane Coatings”, Polymer, vol. 50, no. 3, pp. 756–766, 2009, doi: 10.1016/j.polymer.2008.12.019.

A. C. Sagle, E. M. Van Wagner, H. Ju, B. D. McCloskey, B. D. Freeman, and M. M. Sharma, “PEG-Coated Reverse Osmosis Membranes: Desalination Properties and Fouling Resistance”, Journal of Membrane Science, vol. 340, no. 1+2, pp. 92–108, 2009, doi: 10.1016/j.memsci.2009.05.013.

E. M. Van Wagner, M. M. Sharma, and B. D. Freeman, “Surface Modification to Enhance the Fouling Resistance of Commercial Reverse Osmosis Membranes”, 2009 AlChE Annual Meeting. AlChE, Nashville, Tennessee, U.S.A., November 8-13, 2009, 2009.

I. Benson, L. Nghiem, S. L. Bryant, M. M. Sharma, and C. Huh, “Development and Use of a Simulation Model for Mobility/Conformance Control Using a pH-Sensitive Polymer”, 2007 SPE Annual Technical Conference and Exhibition. 2007.

H. Ju et al., “Synthesis and Characterization of Surface Coated Ultrafiltration Membranes to enhanced Oil/Water Fouling Resistance”, ACS Division of Polymeric Materials: Science and Engineering, vol. 95. American Chemical Society, San Francisco, California, U.S.A., September 10-14, 2006, p. 68, 2006.

S. K. Choi, Y. M. Ermel, S. L. Bryant, C. Huh, and M. M. Sharma, “Transport of a pH-Sensitive Polymer in Porous Media for Novel Mobility-Control Applications”, in SPE/DOE Symposium on Improved Oil Recovery, Tulsa, Oklahoma, U.S.A., April 22-26, 2006: Society of Petroleum Engineers, 2006. doi: 10.2118/99656-MS.

Z. Zhai and M. M. Sharma, “A New Approach to Modeling Hydraulic Fractures in Unconsolidated Sands”, in SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., October 9-12, 2005: Society of Petroleum Engineers, 2005. doi: http://dx.doi.org/10.2118/96246-MS.

C. Huh, S. K. Choi, and M. M. Sharma, “A Rheological Model for pH Sensitive Ionic Polymer Solutions for Optimal Mobility Control Applications”, in SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., October 9-12, 2005: Society of Petroleum Engineers, 2005. doi: http://dx.doi.org/10.2118/96914-MS.

R. Suarez-Rivera, J. Stenebraten, P. B. Gadde, and M. M. Sharma, “An Experimental Investigation of Fracture Propagation During Water Injection”, in International Symposium and Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 20-21, 2002: Society of Petroleum Engineers, 2002. doi: 10.2118/73740-MS.

M. Yu, P. B. Gadde, and M. M. Sharma, “Process-Based Decomposition On Distributed Systems-A Strategy To Solve Large Scale Simulation Problems”, in SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., September 29 - October 2, 2002: Society of Petroleum Engineers, 2002. doi: 10.2118/77721-MS.

H. A. Al-Anazi and M. M. Sharma, “Use of a pH Sensitive Polymer for Conformance Control”, in International Symposium & Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 20-21, 2002: Society of Petroleum Engineers, 2002. doi: 10.2118/73782-MS.

P. B. Gadde and M. M. Sharma, “Growing Injection Well Fractures and Their Impact on Waterflood Performance”, in SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, U.S.A., September 30 - October 03, 2001: Society of Petroleum Engineers, 2001. doi: 10.2118/71614-MS.

M. M. Sharma, S. Pang, K. E. Wennberg, and L. N. Morgenthaler, “Injectivity Decline in Water Injection Wells: An Offshore Gulf of Mexico Case Study”, SPE Production & Facilities, vol. 15, pp. 6–13, 2000, doi: 10.2118/60901-PA.

K. P. Saripalli, M. M. Sharma, and S. L. Bryant, “Modeling Injection Well Performance during Deep-well Injection of Liquid Wastes”, Journal of Hydrology, vol. 227, no. 1-4, pp. 41–55, 2000, doi: 10.1016/S0022-1694(99)00164-X.

K. S. Saripalli, S. L. Bryant, and M. M. Sharma, “Role of Fracture Face and Formation Plugging in Injection Well Fracturing and Injectivity Decline”, in SPE/EPA Exploration and Production Environmental Conference, Austin, Texas, U.S.A., March 1-3, 1999: Society of Petroleum Engineers, 1999. doi: 10.2118/52731-MS.

S. Pang and M. M. Sharma, “A Model For Predicting Injectivity Decline in Water Injection Wells”, SPE Formation Evaluation, vol. 12, no. 03, pp. 194–201, 1997, doi: 10.2118/28489-PA.

K. E. Wennberg and M. M. Sharma, “Determination of the Filtration Coefficient and the Transition Time for Water Injection”, in SPE European Formation Damage Conference, The Hague, Netherlands, June 2-3, 1997: Society of Petroleum Engineers, 1997. doi: 10.2118/38181-MS.

S. Pang and M. M. Sharma, “Evaluating the Performance of Open-Hole, Perforated and Fractured Water Injection Wells”, in SPE European Formation Damage Control Conference, The Hague, Netherlands, May 15-16, 1995: Society of Petroleum Engineers, 1995. doi: 10.2118/30127-MS.

S. Vitthal and M. M. Sharma, “A Stokesian Dynamics Model for Particle Deposition and Buildup in Granular Media”, Journal of Colloid and Interface Science, vol. 153, no. 02, pp. 314–336, 1992, doi: 10.1016/0021-9797(92)90325-G.

G. Wu and M. M. Sharma, “A Model for Precipitation and Dissolution Processes with Precipitate Migration”, AIChE Journal, vol. 35, 1989.

M. M. Sharma and Y. C. Yortsos, “A Network Model for Deep Bed Filtration Processes”, AIChE Journal, vol. 33, 1987.

M. M. Sharma and Y. C. Yortsos, “Transport of Particulate Suspensions in Porous Media. Model Formulation”, AIChE Journal, vol. 33, 1987.