Publications

2016

[1]
A. Suri and M. M. Sharma, “Apparent Shear Yield Stress of Filter Cakes Determine Flow Initiation Pressures and Near Wllbore Return Permeabilites”, in Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, UAE, Novebmer 7-10, 2016: Society of Petroleum Engineers, 2016.
Keywords: Drilling Induced Damage

2013

[1]
S. M. Wilson, A. S. Nagoo, and M. M. Sharma, “Analysis of Potential Bridging Scenarios During Blowout Events”, in SPE/IADC Drilling Conference, Amsterdam, The Netherlands, March 5-7, 2013: Society of Petroleum Engineers, 2013. doi: http://dx.doi.org/10.2118/163438-MS.
Keywords: Drilling Induced Damage, Multi-phase flow in wellbore
[1]
C. M. Jung, R. Zhang, M. E. Chenevert, and M. M. Sharma, “High-Performance Water-Based Mud Using Nanoparticles for Shale Reservoirs”, in SPE/AAPG/SEG Unconventional Resources Technology Conference, Denver, Colorado, U.S.A., August 12-14, 2013: Society of Petroleum Engineers, 2013. doi: http://dx.doi.org/10.1190/URTEC2013-106.
Keywords: Wellbore Stability, Drilling Induced Damage

2012

[1]
M. M. Sharma, M. E. Chenevert, L. Ji, Q. Guo, J. E. Friedheim, and R. Zhang, “A New Family of Nanoparticle Based Drilling Fluids”, in SPE Hydraulic Fracturing Technology Conference, San Antonio, Texas, U.S.A., October 8-10, 2012: Society of Petroleum Engineers, 2012. doi: http://dx.doi.org/10.2118/160045-MS.
Keywords: Wellbore Stability, Drilling Induced Damage
[1]
L. Ji, Q. Guo, J. E. Friedheim, R. Zhang, M. E. Chenevert, and M. M. Sharma, “Laboratory Evaluation and Analysis of Physical Shale Inhibition of an Innovative Water-Based Drilling Fluid with Nanoparticles for Drilling Unconventional Shales”, in SPE Asia Pacific Oil and Gas Conference and Exhibition, Perth, Australia, October 22-24, 2012: Society of Petroleum Engineers, 2012. doi: http://dx.doi.org/10.2118/158895-MS.
Keywords: Drilling Induced Damage, Shale Characterization, Shale-fluid interactions

2011

[1]
J. Cai, M. E. Chenevert, M. M. Sharma, and J. E. Friedheim, “Decreasing Water Invasion into Atoka Shale Using Non-modified Silica Nanoparticles”, in SPE Annual Technical Conference and Exhibition, Denver, Colorado, U.S.A., October 30-November 2, 2011: Society of Petroleum Engineers, 2011. doi: http://dx.doi.org/10.2118/146979-MS.
Keywords: Wellbore Stability, Drilling Induced Damage

2010

[1]
A. Suri and M. M. Sharma, “An Improved Laboratory Method to Estimate Flow Initiation Pressures and Near Wellbore Return Permeabilities”, in SPE Western Regional Meeting, Anaheim, California, U.S.A., May 27-29, 2010: Society of Petroleum Engineers, 2010. doi: http://dx.doi.org/10.2118/132098-MS.
Keywords: Formation Damage, Drilling Induced Damage

2009

[1]
T. Sensoy, M. E. Chenevert, and M. M. Sharma, “Minimizing Water Invasion in Shales Using Nanoparticles”, in SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana, U.S.A., October 4-7, 2009: Society of Petroleum Engineers, 2009. doi: http://dx.doi.org/10.2118/124429-MS.
Keywords: Wellbore Stability, Drilling Induced Damage, Shale-fluid interactions

2008

[1]
T. M. Al-Bazali, J. Zhang, M. E. Chenevert, and M. M. Sharma, “Capillary Entry Pressure of Oil-based Muds in Shales: The Key to the Success of Oil-based Muds”, Energy Sources, vol. 30, no. 4, pp. 297–308, 2008, doi: http://dx.doi.org/10.1080/15567030600820609.
Keywords: Wellbore Stability, Drilling Induced Damage, Shale Characterization, Shale-fluid interactions

2006

[1]
A. Suri and M. M. Sharma, “Cleanup of Water-Based Kill-Pills in Laboratory-Simulated Perforation Tunnels During Flowback”, in SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., September 24-27, 2006: Society of Petroleum Engineers, 2006. doi: 10.2118/102177-MS.
Keywords: Formation Damage, Drilling Induced Damage, Cementing / Perforating / Gravel Packing

2004

[1]
K. Al-Rlyamy and M. M. Sharma, “Filtration Properties of Oil-In-Water Emulsions Containing Solids”, SPE Drilling & Completion, vol. 19, no. 03, pp. 164–172, 2004, doi: 10.2118/89015-PA.
Keywords: Formation Damage, Drilling Induced Damage, Emulsions
[1]
A. Suri and M. M. Sharma, “Strategies for Sizing Particles in Drilling and Completion Fluid”, SPE Journal, vol. 9, no. 01, pp. 13–23, 2004, doi: http://dx.doi.org/10.2118/87676-PA.
Keywords: Formation Damage, Drilling Induced Damage

2001

[1]
A. Suri and M. M. Sharma, “Strategies for Sizing Particles in Drilling and Completion Fluids”, in SPE European Formation Damage Conference, The Hague, Netherlands, May 21-22, 2001: Society of Petroleum Engineers, 2001. doi: 10.2118/68964-MS.
Keywords: Formation Damage, Basic Surface and Colloid Science, Colloid Transport, Drilling Induced Damage
[1]
R. S. Roy and M. M. Sharma, “The Relative Importance of Solids and Filtrate Invasion on the Flow Initiation Pressure”, in SPE European Formation Damage Conference, The Hague, Netherlands, May 21-22, 2001: Society of Petroleum Engineers, 2001. doi: 10.2118/68949-MS.
Keywords: Formation Damage, Drilling Induced Damage

1999

[1]
Z. M. Zain and M. M. Sharma, “Cleanup of Wall-Building Filter Cakes”, in SPE Annual Technical Conference and Exhibition, Houston, Texas, U.S.A., October 3-6, 1999: Society of Petroleum Engineers, 1999. doi: 10.2118/56635-MS.
Keywords: Formation Damage, Drilling Induced Damage
[1]
M. M. Sharma and Z. M. Zain, “Model Simplifies Filter Cake Lift-Off Pressure Determination”, Oil & Gas Journal, vol. 97, no. 44, pp. 70–75, 1999, [Online]. Available: http://www.ogj.com/articles/print/volume-97/issue-44/in-this-issue/production/model-simplifies-filter-cake-lift-off-pressure-determination.html
Keywords: Formation Damage, Drilling Induced Damage

1998

[1]
B. Thomas and M. M. Sharma, “Distribution of Mud Induced Damage Around Horizontal Wellbores”, in SPE Formation Damage Control Conference, Lafayette, Louisiana, U.S.A., Feburary 18-19, 1998: Society of Petroleum Engineers, 1998. doi: 10.2118/39468-MS.
Keywords: Formation Damage, Drilling Induced Damage
[1]
Z. Philip, M. M. Sharma, and M. E. Chenevert, “The Role of Taylor Vortices in the Transport of Drill Cuttings”, in SPE India Oil and Gas Conference and Exhibition, New Delhi, India, February 17-19, 1998: Society of Petroleum Engineers, 1998. doi: 10.2118/39504-MS.
Keywords: Formation Damage, Drilling Induced Damage

1997

[1]
T. Singh and M. M. Sharma, “Development of an Acid Degradeable Drill-In Fluid for Fractured Reservoirs”, in SPE European Formation Damage Conference, The Hague, Netherlands, June 2-3, 1997: Society of Petroleum Engineers, 1997. doi: 10.2118/38153-MS.
Keywords: Formation Damage, Drilling Induced Damage

1996

[1]
D. Jiao and M. M. Sharma, “Mud Induced Formation Damage in Fractured Reservoirs”, SPE Drilling & Completion, vol. 11, no. 01, pp. 11–16, 1996, doi: 10.2118/30107-PA.
Keywords: Formation Damage, Drilling Induced Damage

1994

[1]
D. Jiao and M. M. Sharma, “Mechanism of Cake Buildup in Cross-Flow Filtration of Colloidal Suspensions”, Journal of Colloid and Interface Science, vol. 162, no. 02, pp. 454–462, 1994, doi: 10.1006/jcis.1994.1060.
Keywords: Formation Damage, Drilling Induced Damage

1993

[1]
D. Jiao and M. M. Sharma, “Dynamic Filtration of Invert-Emulsion Muds”, SPE Drilling & Completion, vol. 8, no. 03, pp. 165–169, 1993, doi: 10.2118/24759-PA.
Keywords: Formation Damage, Drilling Induced Damage
[1]
D. Jiao and M. M. Sharma, “Investigation of Dynamic Mud Cake Formation: The Concept of Minimum Overbalance Pressure”, in SPE Annual Technical Conference and Exhibition, Houston, Texas, U.S.A., October 3-6, 1993: Society of Petroleum Engineers, 1993. doi: 10.2118/26323-MS.
Keywords: Formation Damage, Drilling Induced Damage

1992

[1]
D. Jiao and M. M. Sharma, “Formation Damage Due to Static and Dynamic Filtration of Water-Based Muds”, in SPE Formation Damage Control Symposium, Lafayette, Louisiana, U.S.A., Feburary 26-27, 1992: Society of Petroleum Engineers, 1992. doi: 10.2118/23823-MS.
Keywords: Drilling Induced Damage

1989

[1]
S. Y. Baghdkian, M. M. Sharma, and L. L. Handy, “Flow of Clay Suspensions through Porous Media”, SPE Reservoir Engineering, vol. 4, no. 02, pp. 213–220, 1989, doi: 10.2118/16257-PA.
Keywords: Formation Damage, Drilling Induced Damage, Fines Migration