Publications
"Modelling of Hydraulic Fracture Closure on Proppants with Proppant Settling", Journal of Petroleum Science and Engineering, vol. 171, pp. 636-645, 12/2018.
, "Sand Production Caused by Water-Hammer Events: Implications for Shut-In Protocols and Design of Water-Injection Wells", SPE Production & Operations, vol. 34, issue 03, pp. 461-472, 08/2019.
, "A Network Model for the Resistivity Behavior of Partially Saturated Rocks", SPWLA 29th Annual Logging Symposium, 06/1988.
, "Unified Pressure and Rate Transient Analysis of Production and Shut-in Data from Fractured Horizontal Wells", SPE Hydraulic Fracturing Technology Conference and Exhibition, Virtual, May 4-6, 2021, Society of Petroleum Engineers, 05/2021.
, "Estimating Unpropped Fracture Conductivity and Compliance from Diagnostic Fracture Injection Tests", SPE Hydraulic Fracturing Technology Conference and Exhibition, The Woodlands, Texas, U.S.A., January 23-25, 2018, Society of Petroleum Engineers, 01/2018.
, "Estimating Unpropped-Fracture Conductivity and Fracture Compliance From Diagnostic Fracture-Injection Tests", SPE Journal, vol. 23, issue 05, pp. 1648-1668, 10/2018.
, "Estimating Reservoir and Fracture Properties from Stage-By-Stage Pressure Decline Analysis in Horizontal Wells", SPE Annual Technical Conference and Exhibition, Virtual, October 28-29, 2020, Society of Petroleum Engineers, 10/2020.
, "New Variable Compliance Method for Estimating In-Situ Stress and Leak-off from DFIT data", SPE Annual Technical Conference and Exhibition, San Antonio, Texas, U.S.A., October 9-11, 2017, Society of Petroleum Engineer, 10/2017.
, "A Novel Approach for Estimating Formation Permeability and Revisit After-Closure Analysis from DFIT", SPE Hydraulic Fracturing Technology Conference & Exhibition, The Woodlands, TX, U.S.A., February 5-7, 2019, Society of Petroleum Engineers, 02/2019.
, "A computationally efficient approach to modeling contact problems and fracture closure using superposition method", Theoretical and Applied Fracture Mechanics, vol. 93, pp. 276-287, 09/2017.
, "Predicting Sand Production in HPHT Wells in the Tarim Basin", SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., September 24-26, 2018, Society of Petroleum Engineers, 09/2018.
, "A Fully 3-D, Multi-Phase, Poro-Elasto-Plastic Model for Sand Production", SPE Annual Technical Conference and Exhibition, Dubai, UAE, September 26–28, 2016, Society of Petroleum Engineers, 09/2016.
, "A Novel Approach for Estimating Formation Permeability and Revisiting After-Closure Analysis of Diagnostic Fracture-Injection Tests", SPE Journal, vol. 24, issue 04, pp. 1809-1829, 08/2019.
, "Uniquely determine fracture dimension and formation permeability from diagnostic fracture injection test", Rock Mechanics Bulletin, vol. 2, issue 02, pp. 100040, 04/2023.
, "Estimating Fracture Closure Stress in Naturally Fractured Reservoirs with Diagnostic Fracture Injection Tests", 52nd US Rock Mechanics / Geomechanics Symposium, Seattle, WA, U.S.A., June 17-20, 2018, American Rock Mechanics Association, 06/2018.
, "The Role of Elasto-Plasticity in Cavity Shape and Sand Production in Oil and Gas Wells", SPE Annual Technical Conference and Exhibition, San Antonio, Texas, October 9-11, 2017, Society of Petroleum Engineers, 10/2017.
, "Unified transient analysis (UTA) of production and shut-in data from hydraulic fractured horizontal wells", Journal of Petroleun Science and Engineering, vol. 209, 02/2022.
, "A Non-Local Model for Fracture Closure on Rough Fracture Faces and Asperities", Journal of Petroleum Science and Engineering, vol. 154, pp. 425-437, 06/2017.
, "A Rapid Injection Flow-Back Test (RIFT) to Estimate In-situ Stress and Pore Pressure", SPE Hydraulic Fracturing Technology Conference and Exhibition, The Woodlands, Texas, U.S.A., February 4-6, 2020, Society of Petroleum Engineers, 02/2020.
, "The Role of Elasto-Plasticity in Cavity Shape and Sand Production in Oil and Gas Wells", SPE Journal, vol. 24, issue 02, pp. 744-756, 04/2019.
, "Effect of Fluid Type and Multi-Phase Flow on Sand Production in Oil and Gas Wells", SPE Annual Technical Conference and Exhibition, San Antonio, Texas, October 9-11, 2017, Society of Petroleum Engineers, 10/2017.
, "Unconsolidated Sand Grain Shape, Size Impact on Frac-Pack Design", Oil and Gas Journal, vol. 95, issue 20, pp. 67-72, 05/1997.
, "Sand Production Caused by Water Hammer Events: Implications for Shut-In Protocols and Design of Water Injection Wells", SPE International Conference and Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 7-9, 2018, Society of Petroleum Engineers, 02/2018.
, "A 3-D Poro-Elasto-Plastic Model for Sand Production around Open-Hole and Cased & Perforated Wellbores", 50th US Rock Mechanics / Geomechanics Symposium, Houston, Texas, U.S.A. June 26-29, 2016, American Rock Mechanics Association, 06/2016.
, "Determination of the Filtration Coefficient and the Transition Time for Water Injection", SPE European Formation Damage Conference, The Hague, Netherlands, June 2-3, 1997, Society of Petroleum Engineers, 06/1997.
, "Quantification of Log -Core Correlation Using the Formation MicroScanner", SPE Annual Technical Conference and Exhibition, Dallas, Texas, U.S.A., October 6-9, 1991, Society of Petroleum Engineers, 10/1991.
, "Analysis of Potential Bridging Scenarios During Blowout Events", SPE/IADC Drilling Conference, Amsterdam, The Netherlands, March 5-7, 2013, Society of Petroleum Engineers, 03/2013.
, "Factors Governing the Performance of Multi-Layered Metal-Mesh Screens", SPE International Conference and Exhibition on Formation Damage Control, Lafayette, Louisiana, U.S.A., February 24-26, 2016, Society of Petroleum Engineers, 02/2016.
, "A Model for the Conductivity and Compliance of Unpropped Fractures", SPE Hydraulic Fracturing Technology Conference and Exhibition, The Woodlands, Texas, U.S.A., January 24-28, 2017, Society of Petroleum Engineers, 01/2017.
, "Factors Governing the Predicted Performance of Multilayered Metal-Mesh Screens", SPE Drilling & Completion, vol. 32, issue 03, pp. 141-152, 09/2017.
,